PHDA-B6 RF Jammers – Remote Control Interceptor

Introducing the user-friendly RF blocker SWU-PHDA-B6, actually it’s designed and manufactured specially for interfering the radio frequency signals widely applied by those convenient handheld remote controls, including the popular Car lock remotes used by people worldwide

How does this Signal Jammer for RF look like?

To fulfill the purpose of good carriage experience, this device is designed with the common outlook of hand sized flat box.

Just like those 2.5-inch HDD, it won’t become a burden when you holding it.

The weight is limited to 0.2 kilograms, pretty same with those popular smartphones available in current market.

There are 2 indicators consist of LED light, implanted at the top of black outer casing’s front.

1. Lighting icon: on the left area, it stands for charging state, while device is in charging it will be red, otherwise stays in OFF status.
2. Cycle icon: on the right area, it stands for working state, while device is in running it will be green, otherwise stays in OFF status

At the top of right side panel of this car lock connection blocker, you can find the power switch button, with the white “ON” and “OFF” words printed aside.

Simply push it to the “ON” side, it will immediately turn to running state and establish blocking field.

Meanwhile at the bottom, there is the power input port with white mark of “DCIN5V”.

You can use the attached micro-USB cable to charge this equipment through the port, while it’s running out of power.

Device specifications of the RF Blocker

– Power States: Inputs of AC 5V

Outputs of 4 Watt

– Battery Status: Capacity of 1,050 mAh

Lasting of 120 minutes

– Jamming Effect: Range of 20 meters

Detailed Information about Frequencies

1. Car Lock of 315 MHz
2. Car Lock of 433 MHz
3. LoRa devices of 868 MHz
4. LoRa devices of 915 MHz

Other Accessories attached in the Packing

1. Black AC Charger
2. Black Car AC Charger
3. Black Micro-USB Cable